Ceramic Coating
Ceramic Coating in North Fort Worth & Southlake
Flo Details is a System X certified installer and also installs Shine Supply's Beadlock coatings. A ceramic coating is a professional-grade layer that bonds to your clear coat and protects it for years, not months. Beadlock Pro starts at $950, and our premium coatings, Beadlock Black and System X MAX G+, start at $1,400. Every package includes the decontamination and polishing a coating needs to bond correctly.
What ceramic coating actually does
A ceramic coating is a nano-ceramic formula that cures into a hard, glossy layer on top of your clear coat. It sheds water and dirt, blocks UV, and makes the car much easier to wash. It is not armor. It won't stop rock chips or deep scratches, which is what paint protection film is for. For a research-backed comparison, read Sealant vs Ceramic Coating vs PPF.
The result depends on the prep. Any swirls or haze left in the paint get locked under the coating, which is why every package includes decontamination and a cut and polish first.
Ceramic coating vs wax
Wax and silica sealants sit on top of the paint and wear off in months. A ceramic coating bonds to the clear coat and lasts years with the right care. Wax costs less up front. A coating costs more, but it stops the reapply cycle and gives you much stronger protection if you plan to keep the vehicle. Read the full comparison.
Keeping your coating and warranty
Applied correctly and maintained properly, a quality ceramic coating can last the life of the vehicle. Shine Supply rates Beadlock Pro at up to 4 years and Beadlock Black at up to 7 years, and System X backs MAX G+ with a lifetime warranty on cars when it's installed by an accredited installer and inspected every year.
What gets a coating to those numbers is maintenance. Coated vehicles need an annual maintenance detail to keep the coating performing and the warranty valid. That visit includes a full wash, decontamination, a light polish, and a ceramic topper, starting at $375 for sedans.
Ceramic coating packages
Beadlock Pro
A durable, glossy coating for daily drivers.
- Level 1 interior
- Pressure wash and foam bath
- Wheel, tire, and wheel well clean
- Paint decontamination
- Glass clean, trim clean and shine
- 1-stage paint correction (medium cut and refine)
- Shine Supply Beadlock Pro coating
Premium Ceramic
Maximum gloss and our longest-lasting protection.
- Level 1 interior
- Pressure wash and foam bath
- 2-step paint decontamination
- 1-stage paint correction (medium cut and refine)
- Wheel, tire, and wheel well clean and shine
- Trim shine and protection
- Shine Supply Beadlock Black or System X MAX G+
Paint Correction + Ceramic
For paint with heavy swirls, scratches, or oxidation.
- Full paint condition assessment
- 2-stage paint correction (heavy cut and polish), done at our shop
- Ceramic coating of your choice
- Complete interior and exterior prep
Annual Maintenance
Required once a year to keep the coating warranty valid.
- Trash removal, vent and crevice blow out
- Full vacuum and panel wipe down
- Interior glass and surface protection
- Pressure wash and foam bath
- Paint decontamination
- Buff and polish
- Ceramic maintenance topper
Ceramic coating is done mobile at your home or office. Paint that needs a 2-stage correction for heavier swirls and scratches takes more than one day and is done at our North Arlington shop.
How it works
- 01
Assess
We check the paint condition and recommend a package.
- 02
Decontaminate
Wash, foam, and remove bonded contamination.
- 03
Correct
Cut and polish to remove defects before they get sealed in.
- 04
Coat
Apply the coating and let it cure.
Frequently asked questions
How much does ceramic coating cost in Fort Worth?
Shine Supply Beadlock Pro starts at $950, and our premium coatings, Beadlock Black or System X MAX G+, start at $1,400. Every package includes decontamination and a 1-stage paint correction. Vehicles that need heavier paint correction first are quoted after an assessment.
How long does ceramic coating last?
Shine Supply rates Beadlock Pro at up to 4 years and Beadlock Black at up to 7 years. System X backs MAX G+ with a lifetime warranty on cars when installed by an accredited installer and inspected annually. Applied correctly and maintained properly, a ceramic coating can last the life of the vehicle, and an annual maintenance detail is what makes that possible.
Is ceramic coating worth it?
If you plan to keep the vehicle for a few years, usually yes. You get stronger gloss, easier washing, and protection that doesn't need reapplying every few months. If you trade cars every year or two, a Level 3 detail with 1-year silica protection may be the better value.
Does ceramic coating stop scratches and rock chips?
It resists light marring and keeps paint easier to clean, but it won't stop rock chips or deep scratches. Paint protection film does that, and PPF with a coating on top gives you the most complete protection.
Can you coat a car that has swirl marks?
Yes, but the swirls need to come out first or they get sealed under the coating. Every package includes a cut and polish, and cars with heavier defects get full paint correction before coating.
How do I wash a ceramic coated car?
Hand wash with a pH-neutral soap, skip automatic car washes with brushes, and dry with a clean microfiber towel. Washing every couple of weeks keeps the coating performing at its best.
Do you need water or power at my home?
We need access to your water, like an outdoor spigot. We don't need your power. We bring our own 4,800-watt generator.
Where we work
We come to you within about 20 miles of North Fort Worth.